Updating pb manually Free chat naked random

Posted by / 13-Sep-2016 07:40

Updating pb manually

1199.30 Bogo MIPS (lpj=5996544) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 CPU Interface ------------- SDRAM_CS0 ...00000000, size 256MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ...e8000000, size 128MB PEX0_IO ...f2000000, size 1MB INTER_REGS ...f1000000, size 1MB NFLASH_CS ...fa000000, size 2MB SPI_CS ...f4000000, size 16MB BOOT_ROM_CS ...such DEV_BOOTCS ...such CRYPT_ENG ...f0000000, size 2MB Marvell Development Board (LSP Version KW_LSP_4.2.7_patch2)-- net2big_v2 Soc: MV88F6281 Rev 3 LE Detected Tclk 166666667 and Sys Clk 400000000 MV Buttons Device Load Register Marvell USB EHCI Host controller #0 PEX0 interface detected no Link.

PCI: bus0: Fast back to back transfers enabled SCSI subsystem initialized NET: Registered protocol family 2 Time: kw_clocksource clocksource has been installed.

Processor : ARM926EJ-S rev 1 (v5l) Bogo MIPS : 1199.30 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 16384 I assoc : 4 I line length : 32 I sets : 128 D size : 16384 D assoc : 4 D line length : 32 D sets : 128 Hardware : net2big_v2 Revision : 0000 Serial : 0000000000000000 Mem Total: 256840 k B Mem Free: 80132 k B Buffers: 5516 k B Cached: 80340 k B Swap Cached: 0 k B Active: 81684 k B Inactive: 48340 k B Swap Total: 256888 k B Swap Free: 256888 k B Dirty: 36 k B Writeback: 0 k B Anon Pages: 44192 k B Mapped: 17732 k B Slab: 42348 k B SReclaimable: 30456 k B SUnreclaim: 11892 k B Page Tables: 1056 k B NFS_Unstable: 0 k B Bounce: 0 k B Commit Limit: 385308 k B Committed_AS: 267024 k B Vmalloc Total: 385024 k B Vmalloc Used: 16780 k B Vmalloc Chunk: 360444 k B major minor #blocks name 8 0 976762584 sda 8 1 1 sda1 8 2 974751907 sda2 8 5 256977 sda5 8 6 8001 sda6 8 7 8001 sda7 8 8 851413 sda8 8 9 875511 sda9 8 10 8001 sda10 8 16 976762584 sdb 8 17 1 sdb1 8 18 974751907 sdb2 8 21 256977 sdb5 8 22 8001 sdb6 8 23 8001 sdb7 8 24 851413 sdb8 8 25 875511 sdb9 8 26 8001 sdb10 31 0 512 mtdblock0 9 0 7936 md0 9 1 851328 md1 9 2 875392 md2 9 3 256896 md3 9 4 974751808 md4 Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid0 sda2[0] sdb2[1] 3903007616 blocks 64k chunks md3 : active raid1 sda5[0] sdb5[1] 256896 blocks [2/2] [UU] md2 : active raid1 sda9[0] sdb9[1] 875392 blocks [2/2] [UU] md1 : active raid1 sda8[0] sdb8[1] 851328 blocks [2/2] [UU] md0 : active raid1 sdb7[1] sda7[0] 7936 blocks [2/2] [UU] unused devices: rootfs / rootfs rw 0 0 /dev/md0 /oldroot ext3 ro,data=ordered 0 0 none /oldroot/proc proc rw 0 0 none /oldroot/sys sysfs rw 0 0 udev /oldroot/dev tmpfs rw 0 0 devpts /oldroot/dev/pts devpts rw 0 0 none /oldroot/dev/shm tmpfs rw 0 0 /dev/md1 /oldroot/var/original ext3 ro,data=ordered 0 0 /dev/md2 /oldroot/snapshots ext3 rw,data=ordered 0 0 unionfs / unionfs rw,dirs=/oldroot/snapshots/snaps/00=rw:/oldroot/var/original=ro 0 0 proc /proc proc rw 0 0 sys /sys sysfs rw 0 0 /dev/md2 /var ext3 rw,data=ordered 0 0 udev /dev tmpfs rw 0 0 /dev/md2 /tmp ext3 rw,data=ordered 0 0 usbfs /proc/bus/usb usbfs rw 0 0 /dev/md4 /media/internal_1 xfs rw,nosuid,nodev,usrquota,prjquota 0 0 /dev/md4 /lacie/tmp xfs rw,nosuid,nodev,usrquota,prjquota 0 0 /dev/md4 /lacie/var xfs rw,nosuid,nodev,usrquota,prjquota 0 0 /dev/md4 /lacie/torrent_dir xfs rw,nosuid,nodev,usrquota,prjquota 0 0 /dev/md4 /lacie/autoupdate xfs rw,nosuid,nodev,usrquota,prjquota 0 0 /dev/md4 /lacie/afp_db xfs rw,nosuid,nodev,usrquota,prjquota 0 0 /dev/md4 /shares/Share xfs rw,nosuid,nodev,usrquota,prjquota 0 0 /dev/md4 /shares/Public xfs rw,nosuid,nodev,usrquota,prjquota 0 0 nodev sysfs nodev rootfs nodev bdev nodev proc nodev debugfs nodev sockfs nodev pipefs nodev anon_inodefs nodev futexfs nodev tmpfs nodev inotifyfs nodev devpts ext3 ext2 nodev ramfs nodev unionfs xfs nodev usbfs vfat Linux version 2.6.22.18 ([email protected]) (gcc version 4.2.1) #1 Wed Mar 16 UTC 2011 CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 Machine: net2big_v2 Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 65536 DMA zone: 512 pages used for memmap DMA zone: 0 pages reserved DMA zone: 65024 pages, LIFO batch:15 Normal zone: 0 pages used for memmap CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists.

Total pages: 65024 Kernel command line: console=tty S0,115200 root=/dev/sda7 ro reset=0 product Type=PRO_KW PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256MB 0MB 0MB 0MB = 256MB total Memory: 256256KB available (2808K code, 204K data, 484K init) Calibrating delay loop...

md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.

md: using 128k window, over a total of 7936 blocks. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda7 disk 1, wo:0, o:1, dev:sdb7 md: md1 stopped.

IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered Use the XOR engines (acceleration) for enhancing the following functions: o RAID 5 Xor calculation o kernel memcpy o kenrel memzero Number of XOR engines to use: 4 cesadev_init(c000ef80) MV Buttons Driver Load mv_rtc mv_rtc: rtc core: registered mv_rtc as rtc0 mv_rtc mv_rtc: Kirkwood So C RTC added Init kirkwood cpufreq driver Registered led device: net2big:blue:front Registered led device: net2big:red:front Registered led device: net2big:blue:hd1 Registered led device: net2big:red:hd1 Registered led device: net2big:blue:hd2 Registered led device: net2big:red:hd2 gpio-fan gpio-fan: No fan power resource available gpio-fan gpio-fan: GPIO fan initialized gpio-hd-power gpio-hd-power: GPIO Hard Disk power device initialized gpio-usb gpio-usb: USB GPIO's initialized g762 0-003e: device successfully initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Registering unionfs 2.5.3 (for 2.6.22.19) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: tty S0 at MMIO 0xf1012000 (irq = 33) is a 16550A serial8250.0: tty S1 at MMIO 0xf1012100 (irq = 34) is a 16550A INIT Marvell Ethernet Driver: mv_netdev Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o Multi RX Queue support - 4 RX queues o Multi TX Queue support - 2 TX Queues o TCP segmentation offload enabled o Receive checksum offload enabled o Transmit checksum offload enabled o Network Fast Processing (Routing) supported o Driver ERROR statistics enabled o Driver INFO statistics enabled o Proc tool API enabled o Rx descripors: q0=128 q1=128 q2=128 q3=128 o Tx descripors: q0=532 q1=532 o Loading network interface(s): o eth0, ifindex = 1, Gb E port = 0 Warning: Giga 1 is Powered Off mv Fp Rule Db (c077e000): 2048 entries, 8192 bytes Integrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter scsi 0:0:0:0: Direct-Access Hitachi HCS5C1010CLA382 JC4O PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access Hitachi HCS5C1010CLA382 JC4O PQ: 0 ANSI: 5 Disk topology: host_no=0 channel=0 id=0 sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Disk topology: host_no=1 channel=0 id=0 sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 SPI Serial flash detected @ 0xf4000000, 512KB (128sec x 4KB) mice: PS/2 mouse device common for all mice input: gpio-keys as /class/input/input0 i2c /dev entries driver at24 0-0050: 512 byte 24c04 EEPROM (writable) md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 98 MB/s raid6: int32x2 114 MB/s raid6: int32x4 123 MB/s raid6: int32x8 111 MB/s raid6: using algorithm int32x4 (123 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: measuring checksumming speed arm4regs : 1077.200 MB/sec 8regs : 758.800 MB/sec 32regs : 904.400 MB/sec raid5: using function: arm4regs (1077.200 MB/sec) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing init memory: 484K eth0: link down eth0: started md: md0 stopped.

* "RESTRICTION: Service Communication Failure: driver failure (PB) ffao". * "RESTRICTION: Service Communication Failure: Pnk Bstr initialization failed". md: using 128k window, over a total of 875392 blocks. md: bind raid1: raid set md3 active with 2 out of 2 mirrors kjournald starting.Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode.md: bind md: md2: raid array is not clean -- starting background reconstruction raid1: raid set md2 active with 2 out of 2 mirrors md: resync of RAID array md2 md: minimum _guaranteed_ speed: 1000 KB/sec/disk.

updating pb manually-71updating pb manually-84updating pb manually-25

md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.

One thought on “updating pb manually”